Filamenton SPECIAL PVA - Natural - 2,85 mm
14 990 Ft
Filamenton SPECIAL PVA - Natural - 2,85 mm
Filaments manufactured according to the usual Herz formula are now available under the name FilamentOn! FilamentOn PVA (polyvinyl alcohol) is a water-soluble filament primarily used for printing support structures. It works well with materials such as PLA or PETG and allows for the support of complex geometries with undercuts.
In stock
14 990 Ft
Unit price: 29 980 Ft/kg
Points earned after purchase:
300 Ft
Details
After printing, place the object in lukewarm water and the PVA will dissolve completely in a few hours, leaving a clean, smooth surface. The material is highly sensitive to moisture, so it must be stored in a dry place and dried if necessary.
Where to use it:
- For complex geometries requiring internal support
- For prints where manual support removal is impossible or risky
- For functional or demonstration models printed with PLA or PETG
Where not to use it:
- For high-temperature printing (e.g. ABS, PA, PC) – PVA cannot withstand these temperatures
- Storage in humid environments – it degrades quickly Advantages of FilamentOn PVA:
- Completely soluble in water
- Perfect support material for complex shapes
- Compatible with PLA, PETG, and some special TPUs
- Easy post-processing – no manual removal required
- Developed and manufactured in Hungary
Data
Color
Brand
Filamenton
Weight
0,5 kg
Diameter
2.85 mm
Material
PVA
Item number
5800060
Weight
800 g/spool
Additional data:
Recommended printing parameters (e.g. Prusa MMU, Bambulab AMS, Raise3D E2):
- Nozzle temperature: 190–205 °C
- Bed temperature: 50–70 °C
- Cooling: 50–100% (depending on material and configuration)
- Speed: 20–40 mm/s
- Storage: in an airtight container, preferably with moisture removal
- Drying before printing: recommended at 40–50 °C for 4–6 hours
Data sheet
Reviews
Be the first to write a review!