Filamenton PREMIUM Starter Kit - Creative Play

Vibrant colours for creative and playful prints

The FilamentOn PREMIUM Starter Kit – Creative Play contains five vibrant PLA samples and two transparent PETG filament samples. The bold shades of pink, green, yellow, blue-violet and red are complemented by transparent orange and blue filaments.

The varied colour palette is ideal for figurines, toys, decorations, gifts and multicolour models where a cheerful, eye-catching appearance takes centre stage. The transparent PETG samples can also be used to create light-transmitting effects and other distinctive visual features.

Package contents

• FilamentOn PREMIUM PLA – Pink, 100 g
• FilamentOn PREMIUM PLA – UV Green, 100 g
• FilamentOn PREMIUM PLA – Lemon Yellow, 100 g
• FilamentOn PREMIUM PLA – Blue-Violet, 100 g
• FilamentOn PREMIUM PLA – Carmine Red, 100 g
• FilamentOn PREMIUM PETG – Transparent Orange, 100 g
• FilamentOn PREMIUM PETG – Transparent Blue, 100 g

Product specifications

• Number of samples: 7
• Net weight per sample: 100 g
• Total net weight: 0.7 kg
• Filament diameter: 1.75 mm
• Materials: PLA and PETG
• Packaging: spoolless filament samples

Recommended printing parameters

The set contains both PLA and PETG filaments. When switching materials, always use the recommended printing parameters for the respective filament.

FilamentOn PREMIUM PLA

For standard-speed 3D printers
(such as Ender 3, Prusa i3 or Anycubic Mega)

• Nozzle temperature: 190–215 °C
• Bed temperature: 60 °C
• Cooling: 100%
• Print speed: 40–80 mm/s

For high-speed 3D printers
(such as Bambu Lab, Voron, Creality K1 or Prusa MK4)

• Nozzle temperature: 220–225 °C*
• Bed temperature: 50–65 °C**
• Cooling: 100%
• Print speed: up to 250 mm/s

* When printing at high speeds, a higher nozzle temperature than the maximum stated on the packaging may be required.
** For enclosed printers, we recommend a lower bed temperature of 50–55 °C.

FilamentOn PREMIUM PETG

For standard-speed 3D printers
(such as Ender 3, Prusa i3 or Anycubic Mega)

• Nozzle temperature: 240–250 °C
• Bed temperature: 70–90 °C
• Cooling: 50%
• Print speed: 40–60 mm/s

For high-speed 3D printers
(such as Bambu Lab, Voron, Creality K1 or Prusa MK4)

• Nozzle temperature: 250–260 °C*
• Bed temperature: 70–90 °C**
• Cooling: 50%
• Print speed: up to 120 mm/s

* When printing at high speeds, a higher nozzle temperature than the maximum stated on the packaging may be required.
** For enclosed printers, we recommend a lower bed temperature of 70–80 °C.

The values above are recommended starting parameters. Optimal settings may vary depending on the printer model, model geometry, printing speed and environmental conditions.