Filamenton PREMIUM Starter Kit - Earth Tones

Natural shades for models with an organic look

The FilamentOn PREMIUM Starter Kit – Earth Tones contains five naturally coloured PLA samples and two PETG filament samples. The shades of brown, copper brown, orange brown, light ivory and pale green are complemented by Metallic Green and Natural PETG.

This earthy colour palette is especially well suited for nature-inspired models, scale models, home décor, plant pots, figurines and objects with organic shapes.

Package contents

• FilamentOn PREMIUM PLA – Brown, 100 g
• FilamentOn PREMIUM PLA – Copper Brown, 100 g
• FilamentOn PREMIUM PLA – Orange Brown, 100 g
• FilamentOn PREMIUM PLA – Light Ivory, 100 g
• FilamentOn PREMIUM PLA – Pale Green, 100 g
• FilamentOn PREMIUM PETG – Metallic Green, 100 g
• FilamentOn PREMIUM PETG – Natural, 100 g

Product specifications

• Number of samples: 7
• Net weight per sample: 100 g
• Total net weight: 0.7 kg
• Filament diameter: 1.75 mm
• Materials: PLA and PETG
• Packaging: spoolless filament samples

Recommended printing parameters

The set contains both PLA and PETG filaments. When switching materials, always use the recommended printing parameters for the respective filament.

FilamentOn PREMIUM PLA

For standard-speed 3D printers
(such as Ender 3, Prusa i3 or Anycubic Mega)

• Nozzle temperature: 190–215 °C
• Bed temperature: 60 °C
• Cooling: 100%
• Print speed: 40–80 mm/s

For high-speed 3D printers
(such as Bambu Lab, Voron, Creality K1 or Prusa MK4)

• Nozzle temperature: 220–225 °C*
• Bed temperature: 50–65 °C**
• Cooling: 100%
• Print speed: up to 250 mm/s

* When printing at high speeds, a higher nozzle temperature than the maximum stated on the packaging may be required.
** For enclosed printers, we recommend a lower bed temperature of 50–55 °C.

FilamentOn PREMIUM PETG

For standard-speed 3D printers
(such as Ender 3, Prusa i3 or Anycubic Mega)

• Nozzle temperature: 240–250 °C
• Bed temperature: 70–90 °C
• Cooling: 50%
• Print speed: 40–60 mm/s

For high-speed 3D printers
(such as Bambu Lab, Voron, Creality K1 or Prusa MK4)

• Nozzle temperature: 250–260 °C*
• Bed temperature: 70–90 °C**
• Cooling: 50%
• Print speed: up to 120 mm/s

* When printing at high speeds, a higher nozzle temperature than the maximum stated on the packaging may be required.
** For enclosed printers, we recommend a lower bed temperature of 70–80 °C.

The values above are recommended starting parameters. Optimal settings may vary depending on the printer model, model geometry, printing speed and environmental conditions.