Filamenton PREMIUM Starter Kit - Golden Hour

Warm, sunset-inspired shades

The FilamentOn PREMIUM Starter Kit – Golden Hour contains four warm-toned PLA samples and one special metallic-effect PETG filament sample. The gold, yellow and orange-brown shades create a harmonious colour palette, complemented by the subtle glossy finish of the Metallic Pearl PETG.

This selection is ideal for decorations, figurines, gifts, nature-inspired models, as well as autumn-themed or sunset-inspired multicolour prints.

Package contents

• FilamentOn PREMIUM PLA – Gold, 100 g
• FilamentOn PREMIUM PLA – Orange Brown, 100 g
• FilamentOn PREMIUM PLA – Pastel Yellow, 100 g
• FilamentOn PREMIUM PLA – Yellow, 100 g
• FilamentOn PREMIUM PETG – Metallic Pearl, 100 g

Product specifications

• Number of samples: 5
• Net weight per sample: 100 g
• Total net weight: 0.5 kg
• Filament diameter: 1.75 mm
• Materials: PLA and PETG
• Packaging: spoolless filament samples

Recommended printing parameters

The set contains both PLA and PETG filaments. When switching materials, always use the recommended printing parameters for the respective filament.

FilamentOn PREMIUM PLA

For standard-speed 3D printers
(such as Ender 3, Prusa i3 or Anycubic Mega)

• Nozzle temperature: 190–215 °C
• Bed temperature: 60 °C
• Cooling: 100%
• Print speed: 40–80 mm/s

For high-speed 3D printers
(such as Bambu Lab, Voron, Creality K1 or Prusa MK4)

• Nozzle temperature: 220–225 °C*
• Bed temperature: 50–65 °C**
• Cooling: 100%
• Print speed: up to 250 mm/s

* When printing at high speeds, a higher nozzle temperature than the maximum stated on the packaging may be required.
** For enclosed printers, we recommend a lower bed temperature of 50–55 °C.

FilamentOn PREMIUM PETG

For standard-speed 3D printers
(such as Ender 3, Prusa i3 or Anycubic Mega)

• Nozzle temperature: 240–250 °C
• Bed temperature: 70–90 °C
• Cooling: 50%
• Print speed: 40–60 mm/s

For high-speed 3D printers
(such as Bambu Lab, Voron, Creality K1 or Prusa MK4)

• Nozzle temperature: 250–260 °C*
• Bed temperature: 70–90 °C**
• Cooling: 50%
• Print speed: up to 120 mm/s

* When printing at high speeds, a higher nozzle temperature than the maximum stated on the packaging may be required.
** For enclosed printers, we recommend a lower bed temperature of 70–80 °C.

The values above are recommended starting parameters. Optimal settings may vary depending on the printer model, model geometry, printing speed and environmental conditions.