Filamenton PREMIUM Starter Kit - Limitless

A diverse colour palette for almost limitless possibilities

The FilamentOn PREMIUM Starter Kit – Limitless contains five vibrant PLA samples and four transparent PETG filament samples. The orange, dark blue, yellow, dark green and pink PLA filaments are complemented by transparent orange, blue, yellow and green PETG samples.

The wide range of colours makes this set ideal for creative experimentation, figurines, toys, decorations, prototypes and complex multicolour models. By combining opaque and transparent shades, you can create a variety of colour and light effects.

Package contents

• FilamentOn PREMIUM PLA – Orange, 100 g
• FilamentOn PREMIUM PLA – Dark Blue, 100 g
• FilamentOn PREMIUM PLA – Yellow, 100 g
• FilamentOn PREMIUM PLA – Dark Green, 100 g
• FilamentOn PREMIUM PLA – Pink, 100 g
• FilamentOn PREMIUM PETG – Transparent Orange, 100 g
• FilamentOn PREMIUM PETG – Transparent Blue, 100 g
• FilamentOn PREMIUM PETG – Transparent Yellow, 100 g
• FilamentOn PREMIUM PETG – Transparent Green, 100 g

Product specifications

• Number of samples: 9
• Net weight per sample: 100 g
• Total net weight: 0.9 kg
• Filament diameter: 1.75 mm
• Materials: PLA and PETG
• Packaging: spoolless filament samples

Recommended printing parameters

The set contains both PLA and PETG filaments. When switching materials, always use the recommended printing parameters for the respective filament.

FilamentOn PREMIUM PLA

For standard-speed 3D printers
(such as Ender 3, Prusa i3 or Anycubic Mega)

• Nozzle temperature: 190–215 °C
• Bed temperature: 60 °C
• Cooling: 100%
• Print speed: 40–80 mm/s

For high-speed 3D printers
(such as Bambu Lab, Voron, Creality K1 or Prusa MK4)

• Nozzle temperature: 220–225 °C*
• Bed temperature: 50–65 °C**
• Cooling: 100%
• Print speed: up to 250 mm/s

* When printing at high speeds, a higher nozzle temperature than the maximum stated on the packaging may be required.
** For enclosed printers, we recommend a lower bed temperature of 50–55 °C.

FilamentOn PREMIUM PETG

For standard-speed 3D printers
(such as Ender 3, Prusa i3 or Anycubic Mega)

• Nozzle temperature: 240–250 °C
• Bed temperature: 70–90 °C
• Cooling: 50%
• Print speed: 40–60 mm/s

For high-speed 3D printers
(such as Bambu Lab, Voron, Creality K1 or Prusa MK4)

• Nozzle temperature: 250–260 °C*
• Bed temperature: 70–90 °C**
• Cooling: 50%
• Print speed: up to 120 mm/s

* When printing at high speeds, a higher nozzle temperature than the maximum stated on the packaging may be required.
** For enclosed printers, we recommend a lower bed temperature of 70–80 °C.

The values above are recommended starting parameters. Optimal settings may vary depending on the printer model, model geometry, printing speed and environmental conditions.